MULTI AC/DC CLAMP METER

Wide current measurements with tear drop type 55mmφCT up to 2000A.
True rms reading for ACA and ACV.
Data-hold and Auto power off function.
Additional AC/DC voltage, resistance, diode test, continuity check.
Auto zero adjustment for DC current offset.
Conform to IEC safety requirements.

Measuring method Dual slope integration mode
AC Conversion True rms responding
Display 3.5 digit LCD, max. reading of 3999
Accuracy (23℃±5℃, 80%RH or less)
Function/Range/Resolution/Accuracy/Max. input
ACA(50/60Hz) DCA Manual range/40A/0.01A/±2%rdg±8 dgt/AC/DC2000A
ACA(50/60Hz) DCA Manual range/400A/0.1A/±1.5%rdg±8 dgt/AC/DC2000A
ACA(50/60Hz) DCA Manual range/2000A/1A/±1.5%rdg±8 dgt/AC/DC2000A
ACV(50/60Hz) DC V Auto/Manual range/400mV/0.1mV/±1.2%rdg±8 dgt/AC/DC 600Vrms
ACV(50/60Hz) DC V Auto/Manual range/4V/0.001V/±1.2%rdg±8 dgt/AC/DC 600Vrms
ACV(50/60Hz) DC V Auto/Manual range/40V/0.01V/±1.2%rdg±8 dgt/AC/DC 600Vrms
ACV(50/60Hz) DC V Auto/Manual range/400V/0.1V/±1.2%rdg±8 dgt/AC/DC 600Vrms
ACV(50/60Hz) DC V Auto/Manual range/600V/1V/±1.2%rdg±8 dgt/AC/DC 600Vrms
Frequency(Hz) Auto range/100Hz/0.01Hz/±0.5%rdg±3 dgt/AC/DC 600Vrms
Frequency(Hz) Auto range/1000Hz/0.1Hz/±0.5%rdg±3 dgt/AC/DC 600Vrms
Frequency(Hz) Auto range/10kHz/0.001kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms
Frequency(Hz) Auto range/100kHz/0.01kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms
Frequency(Hz) Auto range/1000kHz/0.1kHz/±0.5%rdg±3 dgt/AC/DC 600Vrms
Resistance(Ω) Auto/Manual range/400Ω/0.1Ω/±1.5%rdg±8 dgt/250 Vrms
Resistance(Ω) Auto/Manual range/4kΩ/0.001kΩ/±1.5%rdg±8 dgt/250 Vrms
Resistance(Ω) Auto/Manual range/40kΩ/0.01kΩ/±1.5%rdg±8 dgt/250 Vrms
Resistance(Ω) Auto/Manual range/400kΩ/0.1kΩ/±1.5%rdg±8 dgt/250 Vrms
Resistance(Ω) Auto/Manual range/4000kΩ/1kΩ/±1.5%rdg±8 dgt/250 Vrms
Resistance(Ω) Auto/Manual range/40MΩ/0.01MΩ/±3%rdg±10 dgt/250Vrms
Continuity check/400Ω/0.01Ω/Approx. < 40Ω/250Vrms
Diode test/3V/0.001V/±10%rdg±3 dgt/250Vrms
Crest factor < 3 (0～50% of range)
< 2 (50～100% of range)
Jaw opening capability 55mmφ
Over range indication Blanking of all digits except MSD 1
Data hold indication "DH" mark on LCD
Sampling 2 times/sec
Withstanding Voltage AC 5500V 1 minute max. (Between the core of CT and outer case)
Safety standard IEC 61010-1, IEC 61010-2-032
Installation CategoryⅢ600V phase to earth.
E.M.C. standard EN 61326
Operating Temperature 0℃ to 40℃, 80%RH max. ( Without condensation )
Storage Temperature -10℃ to 60℃, 70%RH max. ( Without condensation )
Low battery indication "Battery" mark on LCD
Auto power off Approx. 10 minutes later after power on
Power supply 1.5V (AM-4, LR03 or AAA)×2
Power consumption 25mW
Battery life Approx. 90 hours continuous
Size 85(W)×240(H)×34(D)mm
Weight Approx. 350g
Accessories Hard carrying case:1
Instruction manual:1
Test lead:1set
Batteries:2